Abstract
<jats:p>The main scope of the project is to design centre fascia for three different materials (plastics, steel, wood) used on three different variants of car. To achieve this, it is proposed to design centre fascia with three different wall thickness using cad tool i.e.; CATIAV5.The whole instrumental panel will be taken as an input. With the help of the supplied input different proposals of centre fascia will be proposed to the customer. The proposals will be developed by using master sectioning once the proposal is finalized by the customer, A-surface of the centre fascia will be developed with the help of master section. Once the A-surface is developed, the prepared surface will be offset to the desired thickness depending upon the material. This offset surface is called as B-surface. While developing the B -surface all the non-offset areas are to be solved using CATIA. On the later part, engineering features are created to the solid model so that it will fit with the instrumental panel assembly. Once the model is finalized, the complete model will be sent to the customer for the final review. Once the model is reviewed by the customer, modifications will be made to the design based upon the feedback received.</jats:p>