Abstract
<jats:p>Çağdaş protetik diş tedavisinde yaygın kullanım alanı bulan zirkonya esaslı restorasyonların materyal içeriği, mikroyapısal özellikleri, mekanik ve optik performansları ile sinterleme protokollerinin bu parametreler üzerindeki etkileri güncel literatür doğrultusunda kapsamlı biçimde değerlendirilmiştir. Dental seramiklerin sınıflandırılması çerçevesinde zirkonyanın polikristalin seramikler arasındaki yeri açıklanmış; farklı zirkonya türleri, stabilizasyon mekanizmaları ve klinik endikasyonları ayrıntılı olarak ele alınmıştır. Zirkonyanın yüksek kırılma dayanımı, biyouyumluluğu, düşük plak retansiyonu ve gelişen translüsensi özellikleri, bu materyali sabit protetik restorasyonlar, implant üstü yapılar ve monolitik uygulamalar açısından önemli bir seçenek hâline getirmektedir. Ayrıca yüzey işlemleri, polisaj protokolleri, renklendirme yaklaşımları ve simantasyon yöntemlerinin restorasyonların uzun dönem klinik başarısına katkısı tartışılmıştır. Özellikle sinterleme sıcaklığı ve süresinin; tane boyutu, faz dağılımı, translüsensi, renk stabilitesi, yüzey pürüzlülüğü ve mekanik dayanım üzerinde belirleyici rol oynadığı vurgulanmıştır. Sonuç olarak, zirkonya restorasyonlarda optimum klinik performansın; uygun materyal seçimi, doğru yüzey yönetimi ve bilimsel temellere dayalı sinterleme protokollerinin bütüncül olarak planlanmasıyla mümkün olduğu ortaya konmuştur. The material composition, microstructural characteristics, mechanical and optical performance of zirconia-based restorations, which have become widely used in contemporary prosthetic dentistry, as well as the effects of sintering protocols on these parameters, have been comprehensively evaluated in light of the current literature. Within the framework of dental ceramic classification, the position of zirconia among polycrystalline ceramics has been clarified, and different zirconia types, stabilization mechanisms, and clinical indications have been discussed in detail. The high fracture strength, biocompatibility, low plaque retention, and improving translucency of zirconia make this material an important option for fixed prosthetic restorations, implant-supported structures, and monolithic applications. In addition, the contributions of surface treatments, polishing protocols, coloring approaches, and cementation methods to the long-term clinical success of restorations have been addressed. Particular emphasis has been placed on the decisive role of sintering temperature and duration in determining grain size, phase distribution, translucency, color stability, surface roughness, and mechanical strength. In conclusion, optimal clinical performance of zirconia restorations depends on the holistic planning of appropriate material selection, proper surface management, and scientifically based sintering protocols.</jats:p>