Abstract
<jats:p>В работе рассматривается процесс теплопередачи в трубе эллиптической формы, который включает теплопроводность в стержне и теплоотдачу на поверхностях канала (от горячей среды к одной поверхности и от другой поверхности к холодной, нагреваемой среде). Этот процесс может происходить в кольцевых каналах, образованных двумя трубками: наружной и внутренней. В статье рассмотрена теплопередача, включающая как теплопроводность, так и конвективный теплоперенос. Решение поставленной задачи получено методом Фурье. Как следует из полученного выражения температура трубы по сечению меняется по линейному закону, а от угла не зависит.</jats:p> <jats:p>The paper considers the process of heat transfer in an elliptical-shaped pipe, which includes thermal conductivity in the rod and heat transfer on the channel surfaces (from a hot medium to one surface and from another surface to a cold, heated medium). This process can occur in annular channels formed by two tubes: an outer and an inner one. The article considers heat transfer, which includes both heat conduction and convective heat transfer. The solution to the problem is obtained by the Fourier method. As follows from the expression obtained, the temperature of the pipe varies along the cross-section according to a linear law, and does not depend on the angle.</jats:p>